#16: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sat Mar 12, 2011 10:34 pm ---- seen a few recently as bad as this in the workshop seems to be around same place and very simlar in age too.... not looking good for the future lol
#17: Re: Help required with Rusty Sills Author: rttam, Location: devonPosted: Sun Mar 13, 2011 4:26 am ---- just something i remembered from a while back is it the nearside sill?......
had a 206 in at work with a 'sloshing' sound from the passenger side turns out the sill drain holes were gunked up and the sill was half full of water
#18: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Mar 13, 2011 5:15 am ----
rttam wrote:
just something i remembered from a while back is it the nearside sill?......
had a 206 in at work with a 'sloshing' sound from the passenger side turns out the sill drain holes were gunked up and the sill was half full of water
Thats pure bad maintance then
#19: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sun Mar 13, 2011 12:14 pm ---- Nah its both sills at the front jacking point and at the rear jacking points..... the more i work on the car the more problems that keep arising lol was only firing on 3 cylinders but now sorted that with some bosch super spark plugs but now after taking car 4 a quick test ( On a private road ) all i can hear is knocking from the Front driversside suspension on inspection found that the Drop link bar seals are abliterated so if i change the drop links HOPEFULLY the knocking will stop. So can u buy sills for the normal 206 or is it only the cc ? and any other thoughts on the Knocking other than drop link arm ?
#20: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Mar 13, 2011 12:17 pm ---- You can buy the sills from Peugeot for the hatchback 206's
#21: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sun Mar 13, 2011 12:29 pm ----
MrBSI wrote:
You can buy the sills from Peugeot for the hatchback 206's
is it only the main stealers that sell um or can i get parts from elsewhere ?
#22: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Mar 13, 2011 2:20 pm ----
liambez wrote:
MrBSI wrote:
You can buy the sills from Peugeot for the hatchback 206's
is it only the main stealers that sell um or can i get parts from elsewhere ?
You can get them from most places that supply body panels.
Main dealer ones will be genuine, resist rust much better in the future & will fit first time
#23: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sun Mar 13, 2011 3:17 pm ----
MrBSI wrote:
liambez wrote:
MrBSI wrote:
You can buy the sills from Peugeot for the hatchback 206's
is it only the main stealers that sell um or can i get parts from elsewhere ?
You can get them from most places that supply body panels.
Main dealer ones will be genuine, resist rust much better in the future & will fit first time
i presume its a case of cutting at the rear arch to remove the sill then ? and yeah suspose yor right but was gonna get the car body sealed after its had its blow over so would it really make a diff it was genuine or a copy ?
#24: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Mon Mar 14, 2011 1:30 pm ---- well as advised i contact my local pug garage today to have a heart attack.. there quoting and saying that for Both sills it will be just over £600....... where has the £100 come from ?????
#25: Re: Help required with Rusty Sills Author: Seabook, Posted: Mon Mar 14, 2011 1:31 pm ----
liambez wrote:
well as advised i contact my local pug garage today to have a heart attack.. there quoting and saying that for Both sills it will be just over £600....... where has the £100 come from ?????
peugeot service box
can't be over 600.
#26: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Mon Mar 14, 2011 1:40 pm ---- got a website or number ? i just contacted parts at pug and they Reckon for a pair there over 600 think it was around 620 + vat so ridiculous
#27: Re: Help required with Rusty Sills Author: Seabook, Posted: Mon Mar 14, 2011 2:23 pm ---- will get you the parts number later, still at work atm lol
#28: Re: Help required with Rusty Sills Author: Seabook, Posted: Mon Mar 14, 2011 3:58 pm ----
parts 1=7009 A3 + 7010 E9 = 319.75x2
parts 2=7007 W2 + 7008 Q6 = 126.14x2
parts 4=7007 R9 + 7008 L1 = 90.67x2
#29: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Mon Mar 14, 2011 4:44 pm ---- that would be why.. if u look at the Picture of the rust its the 2 outta sills so its part 1 that i would need so they have got the pricing correct think ill get it patched up instead lol
#30: Re: Help required with Rusty Sills Author: vwaudi, Location: midlandsPosted: Thu May 05, 2011 12:52 pm ---- Just been looking at my sills and they are just as rotten
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17113
Online Now [120]:
Visitors: 119
Members: 0
Staff Online Now:
Page Views:
General
