#1: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Mon Jan 16, 2012 4:34 pm ---- I currently have a 1.1 style so the basic 206 of them all and I have a PP-just a clock at the moment! I have a gti centre console so I was wondering what is the most I can upgrade to and what measures would I have to do! Could I put in one that shows mpg and how many miles in the tank, temp etc or just the date time and temp? Thanks
#2: Re: Interior clock/mfd Author: karimali831, Location: EnglandPosted: Mon Jan 16, 2012 5:40 pm ---- You can get any PPT30/PPT40 but I think you can only get the date and time to display.
#3: Re: Interior clock/mfd Author: Nosvartu, Location: HarrogatePosted: Mon Jan 16, 2012 6:16 pm ---- Sorry to thread steal, but can you get a trip computer installed to show the data?? As id like one on my fever
#4: Re: Interior clock/mfd Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Jan 16, 2012 6:36 pm ---- Is it multiplex or Preplex is 1st question?
#5: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 1:46 am ---- Sorry it's a pre plexed 2001 x reg, currently just have a clock there
#6: Re: Interior clock/mfd Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue Jan 17, 2012 2:48 am ---- This link should help you then ......
#7: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 2:57 am ---- Is this the most I can upgrade it to? Can I not add Mpg etc? Thanks for this Ben!
#8: Re: Interior clock/mfd Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue Jan 17, 2012 3:01 am ---- Yer most you can do really. Could probably add a temp sensor as my Preplex has temp sensor so will be a way to do it,
I did the how to above on my old 206, was easy to do.
#9: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 3:21 am ---- Where would I add that too and how would I go about doing that? I love goIng above and beyond! Haha
#10: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 3:22 pm ---- does anybody know about the temperature sensor? i know where it goes but where do i wire it to?
#11: Re: Interior clock/mfd Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jan 17, 2012 3:26 pm ----
danlouiee wrote:
does anybody know about the temperature sensor? i know where it goes but where do i wire it to?
Are the 2 extra wires in the door loom / mirror connector plug there for the temp sensor?
#12: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 3:35 pm ---- not that i can see, i havent had a proper look on the other side of the door card, would that be where it goes?
#13: Re: Interior clock/mfd Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jan 17, 2012 3:38 pm ----
danlouiee wrote:
not that i can see, i havent had a proper look on the other side of the door card, would that be where it goes?
Mirror plug is normally clipped to the door behind the triangle trim, you might find a tweeter speaker clipped to the back of that trim so dont go yanking it of to hard!
Do you have electric mirrors fitted / working?
Some 206's just have the heated mirror glass & manual mirrors.
#14: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 3:40 pm ---- i dont know if they are even heated! i know they are manual though. my 206 is so basic its unreal so is there a chance it wont have it?
#15: Re: Interior clock/mfd Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jan 17, 2012 3:44 pm ----
danlouiee wrote:
i dont know if they are even heated! i know they are manual though. my 206 is so basic its unreal so is there a chance it wont have it?
You got electric windows?
If you have then pop the switch out & see if there is a spare black plug under it not connector / doing anything.
If you have that spare black plug then thats the electric mirror loom & that also means you will have the cabin wiring for the outside temp sensor.
#16: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 3:49 pm ---- okay, and if i dont have that, can i fit a temperature sensor in the mirror anyway and route the wiring in because i dont have electric mirrors? :/
#17: Re: Interior clock/mfd Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jan 17, 2012 3:53 pm ----
danlouiee wrote:
okay, and if i dont have that, can i fit a temperature sensor in the mirror anyway and route the wiring in because i dont have electric mirrors? :/
Anythings possible but its a whole lot easier if Peugeot have fitted the wires for you
#18: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 3:57 pm ---- i was to buy this from lee 206info.co.uk/Forums/v...40034.html
could i do it? would it be possible because i was imming and amming about this then!
#19: Re: Interior clock/mfd Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jan 17, 2012 4:01 pm ----
could i do it? would it be possible because i was imming and amming about this then!
I dont know what skills you have with tools but it would be simple enough to fit for an average diy person with basic tools.
#20: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 4:02 pm ---- yeah i could fit this easy enough, im quite handy with thims like this, but if i was to buy and fit this could i do the temperature sensor through this?
#21: Re: Interior clock/mfd Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Jan 17, 2012 4:10 pm ----
danlouiee wrote:
yeah i could fit this easy enough, im quite handy with thims like this, but if i was to buy and fit this could i do the temperature sensor through this?
You need to ask him what wires are included with the loom.
#22: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Tue Jan 17, 2012 4:23 pm ---- Thanks for your help mate! So if I do have that part of the loom what happens next?
#23: Re: Interior clock/mfd Author: danlouiee, Location: Plymouth, DevonPosted: Wed Jan 18, 2012 6:52 am ---- Bump
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17187
Online Now [397]:
Visitors: 396
Members: 0
Staff Online Now:
Page Views:
General
