#16: Re: **Spike's Project** Author: Jamie, Location: Ring y0Posted: Sun Mar 21, 2010 9:02 am ---- Agreed, but it's less than half the price...
#17: Re: **Spike's Project** Author: spike_202, Location: West midsPosted: Sun Mar 21, 2010 9:16 am ---- did you not have your air con rad taken out??
#18: Re: **Spike's Project** Author: Edward, Location: In the garagePosted: Sun Mar 21, 2010 9:45 am ---- That sits in front of the coolant radiator so wouldn't do anything...
#19: Re: **Spike's Project** Author: spike_202, Location: West midsPosted: Sun Mar 21, 2010 11:30 am ---- haha my bad, if you got rid of that couldnt you move the rad 4ward a smidge?
#20: Re: **Spike's Project** Author: Edward, Location: In the garagePosted: Sun Mar 21, 2010 12:31 pm ---- Some Longmans cars had the radiator housing moved forward slightly but I think the uprated mounts are better...
I think if you look carefully at this picture you can see the elongated bolt holes.
#21: Re: **Spike's Project** Author: macj, Location: EssexPosted: Sun Mar 21, 2010 1:29 pm ---- I fitted a Toyota rad and did away with the rad cowl... what you see here is a rusty bit of angle to hold it all in place for the RR session... new mount is being fabricated from playdough
#22: Re: **Spike's Project** Author: Edward, Location: In the garagePosted: Sun Mar 21, 2010 1:50 pm ---- Those trumpets look massive. How big are your bodies?
#23: Re: **Spike's Project** Author: macj, Location: EssexPosted: Sun Mar 21, 2010 1:55 pm ---- 45mm..... they look big because the sparrows have made them swell up on impact
#24: Re: **Spike's Project** Author: spike_202, Location: West midsPosted: Sun Mar 21, 2010 2:20 pm ----
macj wrote:
45mm..... they look big because the sparrows have made them swell up on impact
haha i know what you mean i had to prize a trafic cone out of mine the outher day haha
im thinking of taking the air con out now as its not gassed up and i dont use it 2bf so its just a dead weight.
then maybe jiggle the rad over a bit lol
#25: Re: **Spike's Project** Author: macj, Location: EssexPosted: Sun Mar 21, 2010 2:22 pm ---- take it all out... get the heater matrix out too..... there is a very neat and small alternative now
#26: Re: **Spike's Project** Author: spike_202, Location: West midsPosted: Sun Mar 21, 2010 2:31 pm ---- mac im not sure what you mean by the heater matrix isent that the blower/fan bit??
#27: Re: **Spike's Project** Author: macj, Location: EssexPosted: Sun Mar 21, 2010 2:45 pm ---- yes...It weighs 6.6kg.... and a replacement demister is just over .6kg
#28: Re: **Spike's Project** Author: spike_202, Location: West midsPosted: Sun Mar 21, 2010 2:46 pm ---- and were does 1 obtain such an item??
#29: Re: **Spike's Project**with pics** Author: Edward, Location: In the garagePosted: Tue Mar 23, 2010 3:27 pm ----
spike_202 wrote:
Bigger injectors 415cc
Up rated fuel pump.
Those injectors are way too big.
Why do you need an uprated fuel pump as well?
#30: Re: **Spike's Project**with pics** Author: spike_202, Location: West midsPosted: Tue Mar 23, 2010 3:44 pm ---- lol i don't actually know why i even put that. i think it was because i was talking to my mate at the same time about turning his pump up on his 306 tdi lol
and your not the 1st to say they are to big i may have to ring up a few people tomorrow and check up on a few things.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17111
Online Now [31]:
Visitors: 30
Members: 0
Staff Online Now:
Page Views:
General
