|
Author
|
Message |
|
|
 Posted: Tue Feb 09, 2010 4:44 pm |
|
|
|
|
Joined: Feb 09, 2010
Posts: 10
Trade Rating: 0
Location: midlands
|
 |
I posted this on the last site, so here we go again
I had the usual 206 rear worn axle problem, so after much deliberation I decided t buy a good second hand axle and refurbish it myself.
So the axle was 60 pounds and the bearings about 72 pounds. All finished it cost me about 130 pounds and about 6 hrs of time.
Note you will need access to hydraulic press to push torsion bars out of the arms and to assemble the bearings. But this could be done with a set of pullers and a decent vice.
The problem
Striped
second hand axle striped
new bearings
| |  |
|
|
 |
Last edited by vwaudi on Tue Feb 09, 2010 4:49 pm; edited 2 times in total
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 4:46 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2800
Trade Rating: +34
Location: Worthing
|
|
images don't work 
| | |
|
|
|
|
 | |  |
| Moonstone blue 206 1.4look
pro race 1.2 White
Morettes
GTI wings
TEAM: Carbon Fibre 
TEAM: I'm a greedy jelly fiend! | |
 | |  |
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 4:48 pm |
|
|
|
|
Joined: Feb 09, 2010
Posts: 10
Trade Rating: 0
Location: midlands
|
|
easy.......
they do now
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 4:50 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2800
Trade Rating: +34
Location: Worthing
|
|
That makes taking the rear axle apart look easy, what tools did you use?
| | |
|
|
|
|
| | |
| Moonstone blue 206 1.4look
pro race 1.2 White
Morettes
GTI wings
TEAM: Carbon Fibre
TEAM: I'm a greedy jelly fiend! | |
| | |
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 4:52 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 1645
Trade Rating: 0
Location: Chasing Ash, Addaz and Lee........... hopefully catching Addaz and havin fun :P
|
|
BIGGGGGG hammers and a load of brute force i bet!
| | |
|
|
|
|
| | |
| 4.0 V8 S-Type Jaguar
Image removed due to size | |
| | |
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 5:02 pm |
|
|
|
|
Joined: Feb 09, 2010
Posts: 10
Trade Rating: 0
Location: midlands
|
|
nothing special usual stuff. However a press made life a lot easier
press looked something like this.
press
but I think you could do it with some pullers which look like this
pullers
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 5:05 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2800
Trade Rating: +34
Location: Worthing
|
|
Oh right i see,
well its very useful thank you
| | |
|
|
|
|
| | |
| Moonstone blue 206 1.4look
pro race 1.2 White
Morettes
GTI wings
TEAM: Carbon Fibre
TEAM: I'm a greedy jelly fiend! | |
| | |
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 5:10 pm |
|
|
|
|
Joined: Jan 25, 2010
Posts: 3497
Trade Rating: +31
Location: VVT Land, Fife
|
|
The presses are around 140+ second hand on ebay  Even still it's quite a technical process, not that simple! I'll be paying someone to do the 309's one that's for sure.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Feb 09, 2010 5:12 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2800
Trade Rating: +34
Location: Worthing
|
|
| Brian wrote: |
| The presses are around 140+ second hand on ebay Even still it's quite a technical process, not that simple! I'll be paying someone to do the 309's one that's for sure. |
But you learn from trial and error 
| | |
|
|
|
|
| | |
| Moonstone blue 206 1.4look
pro race 1.2 White
Morettes
GTI wings
TEAM: Carbon Fibre
TEAM: I'm a greedy jelly fiend! | |
| | |
|
|
|
|
|
|
|
Posted: Thu May 05, 2011 12:55 pm |
|
|
|
|
Joined: Feb 09, 2010
Posts: 10
Trade Rating: 0
Location: midlands
|
|
3000+ views it must have been useful thread to start
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat May 07, 2011 2:01 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
stupid questions, how did you press the outer oil seal in? 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat May 07, 2011 2:04 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
They go in from either side
Tbh it aint a hard job, i did it with a sledge, a vice, small hammer, and chisel
It really is easy
| | |
|
|
|
|
| | |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
| | |
|
|
|
|
|
|
|
Posted: Sat May 07, 2011 2:09 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
| Addaz wrote: |
They go in from either side
Tbh it aint a hard job, i did it with a sledge, a vice, small hammer, and chisel
It really is easy |
because i end up with a busted rubber seal after i try to hammer it in
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon May 09, 2011 2:59 pm |
|
|
|
|
Joined: Feb 09, 2010
Posts: 10
Trade Rating: 0
Location: midlands
|
|
| Seabook wrote: |
| Addaz wrote: |
They go in from either side
Tbh it aint a hard job, i did it with a sledge, a vice, small hammer, and chisel
It really is easy |
because i end up with a busted rubber seal after i try to hammer it in |
Just taped them in with a hammer, make sure the surfaces are free from crud
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon May 09, 2011 3:02 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
| vwaudi wrote: |
| Seabook wrote: |
| Addaz wrote: |
They go in from either side
Tbh it aint a hard job, i did it with a sledge, a vice, small hammer, and chisel
It really is easy |
because i end up with a busted rubber seal after i try to hammer it in |
Just taped them in with a hammer, make sure the surfaces are free from crud |
Bit of P80 wheel or a wire wheel would do
| | |
|
|
|
|
| | |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17112
Online Now [90]:
Visitors: 90
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
